Minimum order value €15. All prices including German VAT, excluding shipping.

Mounting fixture for gear set
Details
Mounting fixture for gear set
OrderNo.: 29-50.011
PartNo. MZ: 29-50.011
Reproduction
13,00 €
+ -
 Ignition timer with many spacers, to screw into spark plug hole Ignition timer with many spacers, to screw into spark plug hole
Details
Ignition timer with many spacers, to screw into spark plug hole Ignition timer with many spacers, to screw into spark plug hole
OrderNo.: DT270306
Reproduction
For cylinder head with straight spark plug hole, e.g. TS 250/1, ETZ, ES/TS 150, RT. Not suitable for angled spark plug, e.g. ES 250/2, ETS 250.
45,00 €
+ -
Assembly spanner telescopic fork 19-MW 22-1
Details
Assembly spanner telescopic fork 19-MW 22-1
OrderNo.: G8999
PartNo. MZ: 89-99.136
Reproduction
for the ETS and TS forks with 32 mm
85,00 €
+ -
Clutch Extractor 4-Speed with Pressure Piece (Clutch extractor)
Details
Clutch Extractor 4-Speed with Pressure Piece (Clutch extractor)
OrderNo.: GS-901
Reproduction
Made according to the original drawing. For pulling off the clutch basket. Thread M26x1.5 for TS 250 and ES 250/2,ETS 250 4-speed engines.Pull-off screw with fine thread for less effort. High-quality tempered steel. Even the most stubbornly seized seats can be pulled off without the usual damage to tool and engine. Phosphated surface. Includes matching thrust piece.
39,00 €
+ -
Extraction screw for rotor 6V and 12 V MZ alternator
Details
Extraction screw for rotor 6V and 12 V MZ alternator
OrderNo.: ABZ
Reproduction
With this screw you can pull off the rotor of the MZ alternators. Hardness 8.8,length 120 mm
2,00 €
+ -
Extractor f. clutch MZ 5-speed engines
Details
Extractor f. clutch MZ 5-speed engines
OrderNo.: GS-902
GTIN/EAN: 4056144000228
PartNo. MZ: 22-50.435
Reproduction
For pulling off the clutch basket. Thread M24x1.5 As well as in connection with the assembly bridge (order number A15890-00M) for separating the housing halves on 250 engines. Significantly reduces the workload when separating the gearbox halves. High-quality tempered steel. Extraction screw with fine thread. Increased torque. Even the most stubbornly seized seats can be pulled off without the usual damage to tool and engine. Surface phosphated. Including matching thrust piece. Suitable for all vehicles type: TS 250/1 / ETZ 250/251/301 5-speed engines
39,00 €
+ -
Guide pin Piston pin, galvanised 05-MW 19-4
Details
Guide pin Piston pin, galvanised 05-MW 19-4
OrderNo.: D89-99.051
PartNo. MZ: 89-99.051
Reproduction
Reproduction. For pushing out the piston pin.
9,50 €
+ -
Hook wrench for manifold nut
Details
Hook wrench for manifold nut
OrderNo.: 25329A
Reproduction
45-50 mm radius, made in Germany. Solid execution.
13,00 €
+ -
Mounting bridge ETZ125/150,ETZ250, ETZ251, ETZ301, TS 250/1
Details
Mounting bridge ETZ125/150,ETZ250, ETZ251, ETZ301, TS 250/1
OrderNo.: A15890-00M
PartNo. MZ: 22-50.430
Reproduction
89,00 €
+ -

Minimum order value €15. All prices including German VAT, excluding shipping.